Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Maria Leijerstam's South Pole trike

The trike that Britain's Maria Leijerstam is pedalling to the bottom of the world

Britain’s Maria Leijerstam will shortly begin her attempt to become the first person to cycle to the South Pole and here’s the ICE (Inspired Cycle Engineering) Trikes tricycle she’ll be doing it on...

It’s over 400 miles from the edge of Antarctica to the South Pole, it’s likely to take 20 days or more, and it gets pretty parky down there by all accounts. Maria’s tool for the job is this tricycle from ICE Trikes, based in Falmouth, Cornwall.

“We have used our knowledge and expertise in bringing together some of our parts from our current trikes along with a few custom built additions to produce a monster that has the capabilities to go the distance,” say ICE Trikes.

“Our current ICE Trike range was going to make a sound starting point for such a vehicle as it combines stability with an incredibly comfortable riding platform and a dependable frame. However, it was going to require some radical alterations to make it suitable for traversing the extremes of Antarctica’s climate and terrain.”

The frame is ICE’s standard 4130 Cromoly Steel Cruciform with off-the-shelf steering and geometry. ICE’s Ergo-Flow Mesh Seat is standard too, with cushioning in the base and side bolsters to improve comfort. Maria has fitted armrests and uses her sleeping bag as a head rest so her upper body is completely supported. That’s going to be vital because Maria is likely to be on the trike for 18 hours a day. Yep, that’s 18 hours a day. In the Antarctic.

The back end has been redesigned especially for this challenge. It’s made from aircraft-grade heat-treated 4130 chromo steel hand brazed in Ice Trikes’ workshops, and it has been specifically designed to handle the forces from the extremely low gearing (see below), especially in low temperatures. The back end has the ability to hold a 4.8in Surly tyre. Yep, that’s 4.8in – over 12cm (more on the tyres in a mo too). Obviously, you need something chunky to provide grip in soft snow.

ICE have taken their rack top and sides and produced an extension rack with support stays to provide extra capacity to hold all of Maria’s bags. The rack can hold over 100kg (220lb) although Maria says she is taking 45kg (99lb). Carrying the load over the back wheel has the extra benefit of providing more traction on the slippery surfaces.

“The majority of [the] weight loads up the rear driving wheel and in fact reduces the weight on the front two wheels meaning that I might just get some extra float out of my front two wheels,” says Maria.

The boom – the extension that the chainset mounts to – is heat-treated 4130 chromoly steel like the frame. Ice have added a curve to it, the idea being to improve the circulation to Maria’s feet.

ICE Trikes have taken a standard mountain bike chainset and engineered a mid-drive with an extremely low gear. They’ve designed heavy-duty guards to protect the chainrings and prevent the chain dropping off.

The trike is equipped with a Shimano 9-speed cassette, the sprockets ranging from 12-tooth right up to 36-tooth. The mid-drive is a 2:1 step down and the Rotor Q Ring chainset gives a 8.7in bottom gear. This means that Maria has a gear that’s twice as easy as on a normal mountain bike. The chain is a YBN mountain bike chain – or, rather, it’s three of them all hooked up together. It was selected for its ability to handle high forces.

The hubs are Hope’s FatSno. They’re specifically designed fat bike hubs so they’re wider than standard , the idea being that they can build up into super-strong wheels. We’re guessing that you really don’t want to take chances with your wheels when you’re heading for the South Pole.

Ah yeah, the tyres we mentioned earlier: it’s the rear one that’s 4.8in – a Surly Lou. The tyre is knobbly to provide grip over ice, snow, wet and loose. Those spikes have been added by Maria to provide more traction on ice.

The front tyres are from Surly too: Big Fat Larrys. Again, at 4.7in they’re wide so as not to sink into the snow. They come with a tread that’s designed to provide good grip and steering in a variety of conditions.

“On top of this we made a custom fit pair of skis for the front two wheels that fit on with a simple brackets system for when the snow is just too deep to make any headway,” says Maria.

The trike has active braking on the two front wheels, each brake operated independently with levers on either side of the handlebar. There's also a disc parking brake at the back to stop the trike getting blown away in the night.

You can follow Maria Leijerstam on Twitter and she also has a blog. For more info on Ice Trikes, visit their website

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been road.cc technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Add new comment

7 comments

Avatar
massspike | 10 years ago
0 likes

I've started following (the American) Daniel Burton's attempt and based on his blogs and mileage this is a very tough ride. For example, today he had a good day -- 15.3 miles in 10 hours of riding (vs 3 the previous day). For comparison, here in Ottawa on a similar bike (sans gear and trailing sled) I would cover 15 miles in 1-2 hours depending on trail conditions (how deep/packed the snow is).

In the promotional video this trike setup wasn't making much speed but maybe it won't matter if walking pace is the best you can do in Antarctica. It will be interesting to see how she does.

Avatar
Hasis | 10 years ago
0 likes

Well, good luck to her but goodness I hope she's got good back up. The mechs issues already highlighted above suggest to me that this hasn't been thought through sufficiently in terms of planning for 'worst-case' weather and ground conditions. But what do I know?!

Avatar
sq225917 | 10 years ago
0 likes

So what's she going to do in snow more than about 8" deep?

Avatar
massspike replied to sq225917 | 10 years ago
0 likes

Attach the skis and start pulling. No way you ride through 8" with three fat tires. Deep snow is why the Iditabikers end up pushing their bikes 50-100 miles of the 1,000 in good years -- in bad years they give up 1/3 of the way.

Not sure how deep the snow actually gets in Antarctica -- it is notoriously a dry cold continent after all. The Spanish rider is already anticipating skiing a lot of the journey due to snow conditions (although he is currently frustrated by the winds).

Avatar
Gkam84 | 10 years ago
0 likes

The tree tracks through the snow work just fine, as long as you have grip on the back for traction and little grip on the front. I did it all last winter in deep snow.

I agree with the derailleur, it is VERY exposed on my trike, I think it won't be so bad on this one, because its higher from the ground.

The YBN chain sucks donkey d***, it came as standard on my ICE and let me down so much, I switched it in no time.

I thought the platform on one pedal was to help her with one of her knee's, she had a problem pedalling.

Avatar
massspike | 10 years ago
0 likes

I agree with the trike for stability vs a fat bike...especially if you factor in the weight of your gear. However she will be plowing 3 tracks through the snow. Hard to tell how bad it will be because Antarctic snow is different...this setup wouldn't work in North America. But at least she wont have to worry about maneuvering it through trees and along single track  1

Glad to see they went with PowerGrips (pedal straps) imho the only way to go on a snow bike. I also like how they added a platform to the pedal to distribute the weight and help her 360 degree pedal.

I am surprised they didn't go with an internal hub though...that rear derailleur looks pretty exposed and given the rear weight of this setup it is going to get dragged through the ice and snow on occasion and this is the last thing you would want to break off.

Avatar
MrGear | 10 years ago
0 likes

I had my gear and brake cables freeze solid at Afan when it was -6 degs C. I had to walk the bike down the mountain.

So my advice is... good luck!

Latest Comments