Support road.cc

Like this site? Help us to make it better.

Knipex Pliers Wrench M-Grips 150mm

7
£79.99

VERDICT:

7
10
Clever, high-quality adjustable spanner with a great high-leverage grip, but expensive for its niche use
Great quality
Impressive leverage
Easy to adjust
Useful hand vice
Expensive
Rarely vital
Weight: 
196g

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

The Knipex Pliers Wrench M-Grips might sound better in German – the internet tells me it's Knipex Zangenschlüssel – but none of the typically German engineering gets lost in translation. This is basically a very well-made adjustable spanner crossed with waterpump pliers, with clever sliding jaws that always stay parallel. The 10:1 leverage means you can exert some serious torque with it, both as a spanner and as an impromptu vice.

These are hardly vital for bicycle use – you can get very nice spanners for less than £80, should you even need them – but if you like to tinker and maintain things in general, they're extremely useful to have around.

> Buy now: Knipex Pliers Wrench M-Grips for £49.99 from Amazon

Having a ratchet for adjusting the width (press the button, slide the lower jaw, release to lock) isn't really any quicker than using an adjustable spanner's worm drive, but the plier handles do give you a much tighter fit. These are far less likely to slip and round off your bolts.

2023 KNIPEX Pliers Wrench M-Grips 150mm - 2.jpg

The head is smaller than an adjustable's too, if you're working in limited spaces... though the correct spanner would be smaller still. Still, you can really crank on bolts and nuts extremely hard without just levering your fingers apart – the gearing makes it very easy.

> Beginner's guide to bike tools - get all the vital gear for basic bike maintenance

One downside is that working with long threads is fiddly: you have to release and re-grip with the handles each time you reposition, and with no spring to push the jaws apart/the handles into your fingers, that requires some dexterity. An adjustable or a regular spanner is easier.

The 'M-Grip' part refers to the handles, because there are two choices: these big, shaped ones or a simpler thin plastic coating. I tested the thinly coated ones too (shown below), and while these ergonomic M-Grips are comfier under heavy pressure, I actually found the thinner ones easier to manipulate. There's more room between the handles to curl a little finger in as a return spring. The non-M-Grip version is £5 cheaper, too.

2023 KNIPEX Pliers Wrench 150mm - 1.jpg

These are excellent as a vice just for holding things you're working on, and because the jaws are smooth and sit parallel, they won't leave marks the way vice grips will (or let objects twist, the way regular pliers will). They're particularly great for holding and bending small pieces of sheet metal.

The construction is lovely: the components are very strong and don't bend, the shaping is very crisp, and the colourful handles are entirely secure – there's nothing worse than sleeves that slide and spin under pressure. You can even buy the locking mechanism as a spare. Overall quality is great.

> Essential cycling tools and accessories you need to fix any problem

As well as wishing for a return spring, I found these just slightly too small for my hands. Still, Knipex doesn't mess around (it is really German, in case you were wondering, based not far from Düsseldorf in Wuppertal) and also supplies these in 180, 200, 250, 300 and 400mm lengths. It does 100mm and 125mm versions if you want smaller.

There is also, because Knipex is nothing if not exhaustive, a 150mm version with roughened jaws if you do want grip that's more like regular pliers. And we also have the Mini Wrench Pliers on test – full review to come.

Value

At £79.99 via Knipex's UK distributor, Chicken CycleKit, these aren't cheap. You can get a decent 150mm adjustable for a lot less; the RS PRO Adjustable Spanner is £13.03, for instance, while the King Dick Black Phosphate 6in is £16.48 (yes, really... funny name, but they're British and extremely good).

Alternatively, you could buy a decent set of spanners, such as the 11-piece Draper Expert Hi-Torq Metric Combination Spanner Set, for £29.87, plus the Imperial version for £38, and still be under the asking price of this Knipex.

Obviously, you're not getting the handy vice function with these options, though you can use an adjustable to bend sheet metal. It's not nearly as secure or easy, however.

Despite this, I don't personally feel the value here is bad – this tool is extremely well made, it does what it's supposed to do extremely well, and in reality it's available for a lot less money. Plus it has the quality to last a very long time.

At the time of writing, Knipex was selling them direct for £61.50 via its UK Amazon store, then discounting that to £49.99.

Overall

Though arguably of only very occasional use on a typical bicycle – especially a modern road bike – this plier-handled wrench is a very handy tool to have in your garage, workshop or shed. It's effective, very well made and the sort of thing that, on those occasions you need it, is an absolute boon.

Verdict

Clever, high-quality adjustable spanner with a great high-leverage grip, but expensive for its niche use

road.cc test report

Make and model: KNIPEX Pliers Wrench M-Grips 150mm

Size tested: 150mm

Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

Knipex says: "Pliers and a wrench in a single tool.

Replaces the need for sets of metric and imperial spanners

Smooth jaws for damage free installation of plated fittings - working directly on chrome!

Also excellent for gripping, holding, pressing and bending workpieces

Zero backlash jaw pressure prevents damage to edges of sensitive components

Push the button for adjustment on the workpiece

No unintentional shift of the gripping jaws and no slipping of the joint

Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum

The ratchet type principle allows quick and easy tightening and release of all bolted connections

Lever transmission greater than 10 : 1 for strong gripping power

Tell us some more about the technical aspects of the product?

Pliers: chrome-plated

Head: chrome-plated

Handles: plastic coated

Weight: 175 g

Dimensions: 150 x 50 x 25mm

REACH compliant: does not contain SVHC

RoHS compliant: not applicable

Jaw thickness (joint) (B2): 7.0 mm

Joint thickness (B3): 10.5 mm

Tips thickness (B1): 4.7 mm

Adjustment positions: 14

Capacities for nuts: Ø 1 Inch

Capacities for nuts: 27 mm

Rate the product for quality of construction:
 
9/10
Rate the product for performance:
 
9/10
Rate the product for durability:
 
9/10
Rate the product for comfort (if applicable)
 
8/10

This chunkily-gripped version is worth the extra £5.

Rate the product for value:
 
5/10

Tell us how the product performed overall when used for its designed purpose

Very well - these bite down securely and with considerable force on fasteners or anything else, and don't leave marks.

Tell us what you particularly liked about the product

The quality and leverage.

Tell us what you particularly disliked about the product

Could use a return spring.

How does the price compare to that of similar products in the market, including ones recently tested on road.cc?

We haven't reviewed many adjustable spanners or pliers, but this is expensive compared to most typical versions of either.

Did you enjoy using the product? Yes

Would you consider buying the product? Yes - at the current discount.

Would you recommend the product to a friend? Yes

Use this box to explain your overall score

This spanner is very well made and does what it's supposed to do very well. Really the only things going against it are the price, its slight ungainliness if you're winding a long bolt in or out, and – in our case – just how rarely you'll need it on a road bike.

Overall rating: 7/10

About the tester

Age: 48  Height: 183cm  Weight: 78kg

I usually ride: Vitus Zenium SL VR Disc  My best bike is:

I've been riding for: 10-20 years  I ride: A few times a week  I would class myself as: Experienced

I regularly do the following types of riding: general fitness riding, mtb,

Add new comment

55 comments

Avatar
Off the back replied to wycombewheeler | 1 year ago
0 likes

Unless it is described BY ITS MANUFACTURER as Pliers and a Wrench. So its still -  in part at least - Pliers. 

Avatar
chrisonabike replied to wycombewheeler | 1 year ago
2 likes
wycombewheeler wrote:
Off the back wrote:

The word Pliers precedes Wrench ergo its a set of pliers before its a wrench! 

Yes, and a sausage dog is clearly a sausage before it's a dog, as the first word is the most important one.

Phone box, is a box with a phone inside, not a phone that's like a box

butter knife 

Door key

etc etc

this is basic english really.

EDIT autocorrect changed that from "monkey wrench" for me but I think it made a more appropriate choice!

You could add: money wrench and sledgehammer...

Mind you a better pair of words to describe this tool might be "daylight" and "robbery".

Avatar
quiff replied to chrisonabike | 1 year ago
6 likes

Don't wanna be your monkeywrench.

I wanna beeeee... your sledgehammer.

Avatar
pockstone replied to Off the back | 1 year ago
2 likes

At last, a RoadCC comments argument worth getting into! It's clearly the bastard son of a set of pump pliers and an adjustable spanner, without the serrated radius for gripping knurled pump fittings but with the advantage of allowing pressure to be applied to the nut/bolt flats via the hinged handles. ( A disadvantage of adjustable spanners being the inability of the worm gear driven flat to bring sufficient pressure to bear for a tight fit, as many a well rounded nut will attest.) All of which leads me to conclude that it's an adjustable non-pump pliers spanner wrench...

Avatar
mark1a replied to pockstone | 1 year ago
1 like
pockstone wrote:

At last, a RoadCC comments argument worth getting into! It's clearly the bastard son of a set of pump pliers and an adjustable spanner, without the serrated radius for gripping knurled pump fittings but with the advantage of allowing pressure to be applied to the nut/bolt flats via the hinged handles. ( A disadvantage of adjustable spanners being the inability of the worm gear driven flat to bring sufficient pressure to bear for a tight fit, as many a well rounded nut will attest.) All of which leads me to conclude that it's an adjustable non-pump pliers spanner wrench...

... for the principle purpose of spannering nuts and bolts by bringing pressure and rotation to their flat surfaces.

Avatar
David9694 replied to mark1a | 1 year ago
3 likes

Principal purpose - since we're on it 

Avatar
mark1a replied to David9694 | 1 year ago
2 likes
David9694 wrote:

Principal purpose - since we're on it 

Meh - I'll take that!!

Avatar
Off the back replied to pockstone | 1 year ago
1 like

As Meatloaf once sang: - "You took the words right out of my mouth"

Avatar
Off the back replied to pockstone | 1 year ago
1 like
pockstone wrote:

At last, a RoadCC comments argument worth getting into! It's clearly the bastard son of a set of pump pliers and an adjustable spanner, without the serrated radius for gripping knurled pump fittings but with the advantage of allowing pressure to be applied to the nut/bolt flats via the hinged handles. ( A disadvantage of adjustable spanners being the inability of the worm gear driven flat to bring sufficient pressure to bear for a tight fit, as many a well rounded nut will attest.) All of which leads me to conclude that it's an adjustable non-pump pliers spanner wrench...

Sorry, did you say the bastard son of a set of Pump PLIERS?  1

Avatar
pockstone replied to Off the back | 1 year ago
3 likes

I did...which we all take to mean a kind of pump...not a set of pliers!

Avatar
mark1a replied to Off the back | 1 year ago
2 likes
Off the back wrote:

Sorry, did you say the bastard son of a set of Pump PLIERS?  1

By your bizarre logic from a couple of minutes ago (although this could change at any time when you edit your posts), and your interpretation of word order, this would mean it's a pump rather than pliers.

Avatar
Off the back replied to mark1a | 1 year ago
0 likes

I have only ever used a pump on my tyres. I would recommend not using a set of pliers on a tyre. 

Or a wrench or a spanner for that matter. Unless your dust caps are on really really tight, then I would recommend a tool like a Knipex Pliers Wrench M-Grips 150mm. Oh wait....

Avatar
Beatnik69 replied to Off the back | 1 year ago
1 like

Unless said tyre was covered in dog shit...

Avatar
quiff replied to Off the back | 1 year ago
3 likes
Off the back wrote:

I have only ever used a pump on my tyres. I would recommend not using a set of pliers on a tyre. 

What about these?

Avatar
hawkinspeter replied to quiff | 1 year ago
3 likes
quiff wrote:

What about these?

Pffft! Those are just for people with weak fingers who can't wrangle tyres on and off rims using just their thumbs.

I've got a similar pair and they're really helpful.

Avatar
Off the back replied to quiff | 1 year ago
0 likes

I stand by what I said. Those look like a medieval torture device. 

Avatar
pockstone replied to mark1a | 1 year ago
0 likes

You don't miss your water 'till your well rounded nut runs dry.

Avatar
David9694 replied to pockstone | 1 year ago
3 likes

Chaka Demus & Pliers - who remembers them?

https://www.youtube.com/watch?v=ixZjoc_jlmQ

Avatar
Off the back replied to David9694 | 1 year ago
0 likes

No one's ever heard of a Chaka Demus & Wrench have they ? 

Avatar
David9694 replied to Off the back | 1 year ago
2 likes

Earlier incarnation - Pete Best was the drummer, I think.

Avatar
pockstone replied to David9694 | 1 year ago
1 like

Were they a 'Chaka' or a 'Demus' or a ....?
Spanners aplenty this morning!

Avatar
mark1a replied to David9694 | 1 year ago
0 likes

Well, as if by strange coincidence, Pliers

https://en.wikipedia.org/wiki/Pliers_(singer)

has a brother called Spanner Banner

https://en.wikipedia.org/wiki/Spanner_Banner
 

Avatar
hawkinspeter replied to mark1a | 1 year ago
2 likes
mark1a wrote:

Well, as if by strange coincidence, Pliers

https://en.wikipedia.org/wiki/Pliers_(singer)

has a brother called Spanner Banner

https://en.wikipedia.org/wiki/Spanner_Banner

Didn't they get together to form Tool?

https://www.youtube.com/watch?v=MM62wjLrgmA

Avatar
chrisonabike replied to hawkinspeter | 1 year ago
0 likes

... and together with many other such groups such as Shovel,  A Hawk and A Hacksaw etc. are to be found within "garage" music?

Avatar
kinderje replied to chrisonabike | 1 year ago
0 likes

But was it Shovel or Spade that were pioneers of that genre?

Pages

Latest Comments