Support road.cc

Like this site? Help us to make it better.

TECH NEWS

First Look: Mason Progressive Cycles

The full lowdown of the first two models from Dom Mason, the Resolution and the Definition, plus exclusive pics

We had that Dom Mason around here at road.cc HQ on Monday to give us an exclusive first look at the initial two bikes from Mason Progressive Cycles, and here they are.

We showed you a few sneaky snaps of the bikes just before Christmas but this was the first time we’d seen the bikes in the flesh and had the chance to get the full story.

Tell you what, I know you’re pressed for time so here are a few bullet points to get you up to speed before we crack on with the details.

• Dom Mason, formerly of Kinesis UK, has just set up Mason Progressive Cycles
• The initial offering is one alloy frame, the Definition, and one steel frame, the Resolution, built to the same geometry.
• They’re both designed for disc brakes, come with internal cable routing, and are made in Italy.
• Both have clearance for 28mm tyres and full mudguards, and also have rack mounts.

How should you choose between the two bikes?

“They have the same geometry but the different materials put them into different brackets,” says Dom. “The Resolution is the mile-munching smooth steel machine with spring to it, and the Definition is more like a punchy bike for attacking, taking corners fast. They are both designed for a fast spirited ride, with the geometry being suited to long rides.”

We've got a whole lot of info so let’s break it down into bitesize chunks.
 

Innovative use of tubes

Brands will often go to a tubing company and buy a complete ready-designed tubeset, but Dom has been more inventive than that.

The almost D-section down tube of the Resolution, for example, is Columbus Spirit steel tubing with walls that taper down to as little as 0.4mm, but it has been flipped so that the opposite edge from normal is at the top.

Dom has used a faceted oval top tube and he has positioned both the seatstays and chainstays in unconventional orientations to get the results he wanted.

“I spent ages at Columbus in Milan. We were looking at seatstays and they were all too heavy, too straight, the bend was wrong, or they were too low end. Then the guy came back wiping down these tubes that had been in a corner: super narrow road stays that flare out to the hub. I twisted them 180º and found I could get the larger tyre and mudguard clearance that I wanted. They also provided the hourglass profile I wanted for comfort.

“It was a breakthrough moment, so I thought I’d keep flipping things and did something similar with the chainstays. We added custom bends to accommodate the disc calliper and rotor.

“The big profile down tube means the bottom bracket doesn’t twist and the oval top tube keeps it laterally inflexible. With the hourglass seatstays and fairly deep chainstays, the tubeset does exactly what I wanted it to do.”

The Definition frame is made from Dedacciai aluminium alloy – 7000 Series, triple butted and heat treated.

“I spent a fair amount of time choosing these tubes too. The large diameter down tube keeps things stable and the horizontally ovalised top tube does the same job as the one on the Resolution. The builder has done a beautiful job of making it flow into the top of the seatstays.

“Getting the frames right has taken longer than I thought because I’ve done things differently and had to persuade the framebuilders to do things they didn’t want to do, like putting on the disc brake mount and incorporating the MultiPort routing [see below], but I’m very happy with the results,” says Dom.


The Devil’s in the detail

Talking to Dom, you notice that he’s dedicated to getting the details of the design exactly how he wants them. In fact, that’s a massive understatement. He’s obsessed by it.

We showed you his MultiPort system before. It uses a stainless steel oval part that brazes to the Resolution’s frame allowing the use of adaptable cable routing.

An alloy part is bonded into the stainless steel oval and a flip/flop alloy insert fits in there that allows you to run a wire through for a Di2 electronic gear change system, or a split outer mech cable, a full outer cable/hose, or you can blank off the port entirely.

The front mech cable comes out just in front of the bottom bracket and is taken around the BB shell by a small guide that has been designed and made especially for Mason Cycles. It is 3D printed in the UK. The cable stop faces downwards so that it doesn’t collect water and gunk, and it’s removable if you are running Di2. The idea is to keep the shifting precise over the long term.

Another clever feature is the Definition’s bottom bracket. It uses a 50mm shell but it steps down for a standard threaded 68mm-width bottom bracket to fit in there. Why? It leaves enough space for the rear mech cable/wire and rear brake cable/hose to run internally, and it also gives maximum weld area for the large diameter down tube. It’s very neat.

There are loads of other features that have been similarly meticulously thought through: the staggered positioning of the ports on the Definition’s down tube so that the cables sit neatly, eyelets positioned so that the mudguard stays are straight, a neat little exit plate for a Di2 front mech wire... All kinds of little bits and pieces that add up over the entire frame.


Mason’s own Aperture fork

The full-carbon fork fitted to both the Resolution and the Definition is Mason Cycles’ own Aperture design (the pic below shows the various stages of the process from 3 .

“The fork I wanted wasn’t available,” says Dom. “I didn’t want a cyclocross fork and every road fork was either the wrong shape, too harsh or too short with not enough clearance. I wanted a square profile [under the crown] so I could fit a square profile mudguard in. If you have a curved profile there it pushes a square profile mudguard down 10mm, I also wanted internal routing, discrete eyelets, a proper taper steerer and my exact crown height, so I bought my own tooling and made my own fork.

“It makes way more sense to design the frame and fork in conjunction to complement each other, rather than finding an aftermarket fork and making the frame work with it.

The fork is a tapered (1 1/8in to 1 1/2in) design with what Dom is calling Securaxl dropouts. They’re open (as opposed to thru-axle), forward facing and deep.

The Aperture fork, which unlike the frames is made in Taiwan, can take a 28mm tyre with a full mudguard. It would be a relatively easy job to switch to a thru-axle design if that’s the way the market heads in future, as seems likely.


Hunt wheels

We told you last month that Mason Cycles have teamed up with new British brand Hunt for the wheels.

“As with the fork, I was looking around for wheels for ages and there wasn’t anything that was exactly right for the bikes” says Dom. “They were either too expensive or the right price but too heavy.

“I was talking to Tom Marchment of Hunt and I asked if we would work together. I gave him my ideal wheel build and he did loads of research and got seriously nerdy, sourced the right parts and came up with the right wheels: Tubeless compatible, true disc-specific, asymmetric rims for correct dish with discs, EZO Japan bearings, J-bend spokes with brass nipples, centrelock brakes, nice and light... They have everything that I wanted.”

 

High-quality finishes

The finish on each of the bikes looks very high quality. They’re painted in Italy and they go to another Italian facility for the decals.

Wouldn’t it have been easier to get the painting and the decals done in the same place?

“Yeah, but the paint factory I’ve used has a really good reputation and the finish is way better than on anything I’ve done before; two coats of lacquer and it doesn’t scratch,” says Dom. “There is one particularly good decal factory in Italy which I knew was the one I wanted to use and they’ve turned out brilliantly.”

The steel Resolution has an anti-rust treatment inside too.

Because of the way that they’re positioned, the decals are very visible from the side and back of the bike but they disappear almost completely when viewed from the front or three-quarters on.


Looking to the future

Both the Resolution and the Definition should be available to buy at www.masoncycles.cc sometime in March, probably towards the end of the month. They’ll be available as framesets as well as complete bikes.

We’ll have more on the Resolution in the next few days because our man Stu took one for an exclusive First Ride and he’ll be back with his thoughts soon. He’s currently cogitating.

So, what next after these initial two bikes make it to market?

“I want to do a sporty adventure bike and a cyclocross bike,” says Dom. “I’ve call the brand Mason Progressive Cycles because I don’t want to do retro, backward-looking products. Everything I do will be using new technology. I love the idea of blending new tech with traditional craftsmanship.

“I would like to have those bikes out by three-quarters of the way through the year in an ideal world. I want to maybe bring some production to the UK at some point too, like doing a steel frame in Sheffield.”

Look out for our First Ride on the Mason Cycles Resolution in the next few days. For more info go to www.masoncycles.cc.

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been road.cc technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Add new comment

68 comments

Avatar
rjfrussell | 9 years ago
0 likes

If Adrian Newey set up his own F1 team, would it be reasonable for most (all?) articles to point out that he had been moderately successful at designing F1 cars for the teams he previously worked at?

Also, it does strike me that designing the bike and choosing all the materials and components goes a little beyond "marketing".

And also, in any event, that if you are trying to sell a product, "marketing" might be a good thing rather than a bad thing.

And....aaaggggggggggghhhhhhh noooo!!!! I am being lured in by the trolls!!!!!! Reverse away from the discussion!!!!

Avatar
jellysticks | 9 years ago
0 likes

As, sadly, with most stories on most websites, the comments provide both despair and entertainment. The bikes look lovely, a great blend of styling/quality/details/components - I won't be in the market unfortunately as I've recently acquired my +1. I know, I know - there is always the option of another +1.
And my tuppence on price vs. value (who knows, maybe these will retail at £150?!) - if you like it and can justify/afford it, excellent. If not, don't buy it.

Avatar
Dom | 9 years ago
0 likes

Well actually, I wasn't going to wade in on this, but I can weld. In fact I can braze [fillet and capillary], gas weld, arc weld, tig and mig weld and use silver solder and soft solder. Pretty handy with a gas axe too ; ] I taught welding and fabrication amongst other things, in further education for 8yrs or so.

There, I said it.

Avatar
farrell | 9 years ago
0 likes
Dom wrote:

Well actually, I wasn't going to wade in on this, but I can weld. In fact I can braze [fillet and capillary], gas weld, arc weld, tig and mig weld and use silver solder and soft solder. Pretty handy with a gas axe too ; ] I taught welding and fabrication amongst other things, in further education for 8yrs or so.

There, I said it.

If this was the Beano or the Dandy there would be a character drawn in behind DeanF316, pointing at him and the word 'Chortle' hanging in the air.

Avatar
farrell | 9 years ago
0 likes

And Dom, you should definitely do some Mason casquettes, that logo would look mint on one.

Avatar
Hoester | 9 years ago
0 likes

Wow. Ruddy great looking bikes. Really excellent work. As a former happy owner of an early Kinesis frame I hope Dom's new venture flourishes, and off the back of these pictures, I can't see any reason why it shouldn't. I hope all the test ride reviews are favourable.

Must resist looking around the house for things to sell in order to get one........

Avatar
bollandinho | 9 years ago
0 likes

I think they look fantastic.

The only flaw I can see is that by being so versatile, buying one would make it tricky to justify more bikes.

Avatar
Simmo72 | 9 years ago
0 likes

I'm holding out for the hunt wheels, they also look like an exciting product. I'm not a disc convert but I do admire these 2 bikes, classic lines, very well thought out design with a good touch of quality and flair....maybe, just maybe I'll be persuaded.

Avatar
Lumen | 9 years ago
0 likes

They look heavy.

Avatar
Kadinkski | 9 years ago
0 likes

Oh bugger, I was hoping I would hate these as I was about to pull the trigger on another disc road bike. But they're so beautiful now I'm going to have to delay my purchase. Dam you!!

Avatar
welshcyclistguy | 9 years ago
0 likes

140mm rotors i presume?

Avatar
Jonny_Trousers | 9 years ago
0 likes

It'll be interesting to hear how the aluminium stacks up against the steel. With the bigger tyres I would imagine ride quality might be less of a defining issue.

Avatar
glynr36 | 9 years ago
0 likes

Any chances of a rim braked model?
I love the look of them but just don't want discs

Avatar
hampstead_bandit | 9 years ago
0 likes

@Dom

Wicked looking frames, really exact detailing.

Have you considered offering a specific mudguard for your frames?(similar to what giant did for their aluminium Defy)

Best of luck with your new venture.

Avatar
blinddrew | 9 years ago
0 likes

Have to say, normally I'm a carbon man, but these are gorgeous. And practical. And doubtless will be completely out of my price range :¬(

Avatar
hicksdesign | 9 years ago
0 likes

Will RoadCC be testing the Definition too? Before I saw photos I was all for the steel, but now I've seen the alloy version, I'm really keen to see more of that. I love how everything has been thought about in such detail, and the colour schemes/graphics are beautiful.

I'm looking forward to the ride review, and some info on weights and prices!

Avatar
macrophotofly | 9 years ago
0 likes

That black Resolution frame is beautiful. Truely it is. Love the colour and graphics (especially the name transfer from frame to fork). Love the functionality built into it
My carbon disc CXR may have to be replaced in a year or two for something that lovely. Just hope the reach isn't too long for m'ickle arms....

Avatar
Reg Molehusband | 9 years ago
0 likes

Beautifully crafted bike. I already have a great bike, but I wish I could afford one of these too.

Avatar
Chuck replied to rjfrussell | 9 years ago
0 likes
rjfrussell wrote:

If Adrian Newey set up his own F1 team, would it be reasonable for most (all?) articles to point out that he had been moderately successful at designing F1 cars for the teams he previously worked at?

You know Newey doesn't even actually build the cars himself? Tells you everything you need to know about that con artist!

Avatar
rjfrussell replied to farrell | 9 years ago
0 likes
farrell wrote:

If this was the Beano or the Dandy there would be a character drawn in behind DeanF316, pointing at him and the word 'Chortle' hanging in the air.

It probably would, but a label with something stronger would probably be more appropriate.

I take it we all know that "chortle" was simply made up by Lewis Carrol in "Jaberwocky". http://www.oxforddictionaries.com/definition/english/chortle

Avatar
mingmong replied to Dom | 9 years ago
0 likes
Dom wrote:

Well actually, I wasn't going to wade in on this, but I can weld. In fact I can braze [fillet and capillary], gas weld, arc weld, tig and mig weld and use silver solder and soft solder. Pretty handy with a gas axe too ; ] I taught welding and fabrication amongst other things, in further education for 8yrs or so.

There, I said it.

This made me smile, a lot. Can't wait for £rices.

Avatar
Dom replied to hicksdesign | 9 years ago
0 likes
Hicksdesign wrote:

Will RoadCC be testing the Definition too? Before I saw photos I was all for the steel, but now I've seen the alloy version, I'm really keen to see more of that. I love how everything has been thought about in such detail, and the colour schemes/graphics are beautiful.

I'm looking forward to the ride review, and some info on weights and prices!

Hi Hicksdesign,

Thanks for your nice comments!

The 'First Ride' will be the Resolution because the bike I had built fitted the tester! But I plan to leave both a Resolution and Definition bike with road.cc for full testing to follow up the initial test.

Mail me from the site homepage for more info on sizing etc.

Avatar
farrell replied to rjfrussell | 9 years ago
0 likes
rjfrussell wrote:
farrell wrote:

If this was the Beano or the Dandy there would be a character drawn in behind DeanF316, pointing at him and the word 'Chortle' hanging in the air.

It probably would, but a label with something stronger would probably be more appropriate.

I take it you mean 'Arf!'?

Avatar
Municipal Waste | 9 years ago
0 likes

The bike itself looks wonderful and actually for once a bike with all modern design and features that I'd consider buying.... But the graphics suck so I'd probably have an immediate re-speay.

Avatar
Dom | 9 years ago
0 likes

Thank you all so much for your comments, it really is fantastic to finally read some feedback about the bikes and frame details, after working on it for so long.

I haven't had the chance to feedback individually yet, but I will certainly make sure that I do over the next few days.

Avatar
runskiprun replied to Dom | 9 years ago
0 likes

very sexy bikes brother Dom, very sexy...

in order to ramp up the sales, perhaps a freebie competition?
OT, Looking forward to the wheelsets finally getting produced too, exciting times

Avatar
RobD | 9 years ago
0 likes

Gotta agree with most people on here, these look really great, the detail Dom goes into on them seems a step above what a lot of manufacturers do.
I was really tempted by a Condor, but this may have just swayed me if I can afford it

Avatar
fennesz | 9 years ago
0 likes

They both look lovely.

Avatar
nowasps | 9 years ago
0 likes

Ban this sick filth!

Avatar
Chasseur Patate | 9 years ago
0 likes

Hilarious how there's pant wetting about price when the prices haven't even been released.

Cycling's inverse snob wankers are the new snob wankers. Hate on everything that isn't dirt cheap.

Pages

Latest Comments