Judging by the set still adorning the Univega's wide section mudguards and hard-shell panniers, they're impervious to regular hand-washing and everyday muck and dirt. However, they don't like soft shell fabrics regularly subjected to machine washing and lids are at your own risk since there's no way of knowing if the adhesive will damage the shell's integrity.
Good surface preparation is key to preventing them peeling, so give the chosen areas a good wash or alternatively a lick of alcohol based solvent if you're short on time/patience. Whichever route you take, be sure to dry everything thoroughly before applying the stickers to the chosen surface. Smoothing them down at room temperature using your fingers gives them the best change of staying put and I've a set doubling as frame protectors that still look sharp despite 18 months and consistent chafing from abrasive Kevlar cable housings.
Patient/arty types can create all manner of eye-catching designs/logos, especially on trailers-although cycling entrepreneurs might find vinyl lettering a more cost effective means of promoting their business.
Scotchlite requires little introduction and pricks driver attention to around 400m, a little less around town so perfect for dressing blind spots such as pannier sides, rack packs and trailers. Cotton duck, hemp and hard plastic luggage make ideal recipients, although this latest generation have adhered convincingly to slippery weatherproof, rubberised fabrics including camera bags and some budget jackets. Three weeks characterised by plenty of spontaneous green-laning and subsequent clean ups haven't seen any telltale lifting or deterioration and there's plenty of alternative patterns including stars should the military theme not appeal. Some might find 13 quid for a set of stickers a bit steep, but given their usefulness, durability, versatility and longevity I'd say it's pretty reasonable - especially when yousome MTB frame sticker kits that are basically just stickers cost more.
road.cc test report
Make and model: Respro Camo Sticker Kit
Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
'The reflective stickers in this range are on an A4 sheet of Scotchlite material and on 'Day Glo' material. Ideal for cycle and motorcycle surfaces and any other solid surface that needs visibility. We cannot recommend the use of sticker kits for application to helmets as there is no EU law governing this and the adhesives on the vinyls have not been tested. That doesn't mean to say that you cannot use them on helmets as the manufacturers specification sheets say they are usable on fibreglass. Work that one out if you can!
For clothing application, the Pressure Sensitive kit which comes as a 'cut your own' A4 sheet, is a must. It is for use on soft and hard surfaces, and with 'easy peasy' application, it is really cool - no kidding'
Tell us some more about the technical aspects of the product?
A4 sheet of self adhesive 3M Scotchlite stickers for most applications bar lids and clothing-although ours seemed to work just fine on some rubbery textured jackets, cotton duck and similar soft shell panniers.
Rate the product for quality of construction:
8/10
Rate the product for performance:
8/10
Rate the product for durability:
8/10
Certainly stay put so long as their intended surfaces were prepared properly in the first instance.
Rate the product for weight, if applicable:
10/10
Rate the product for comfort, if applicable:
7/10
Rate the product for value:
7/10
Tell us how the product performed overall when used for its designed purpose
High quality stickers that work surprisingly well, grabbing attention from around 400m when lit by vehicle headlamps.They'll remain youthful and where you put them so long as surfaces were properly prepared and machine washing's avoided.
Tell us what you particularly liked about the product
Extremely effective and stangely satisfying to apply.
Tell us what you particularly disliked about the product
Nothing.
Did you enjoy using the product? Yes
Would you consider buying the product? Yes
Would you recommend the product to a friend? Yes
Age: 38 Height: 1m 81 Weight: 70 kilos
I usually ride: Rough Stuff Tourer Based around 4130 Univega mtb Frameset My best bike is: 1955 Holdsworth Road Path and several others including cross & traditional road
I've been riding for: Over 20 years I ride: Most days I would class myself as: Experienced
I regularly do the following types of riding: cyclo cross, commuting, touring, fixed/singlespeed, mtb,
No, because the guarantee is not transferable, so expires if you sell the bike. Had you had the bike from new, then I'm not sure because I don't...
Cannondale are made in Taiwan and Vietnam, I thought?
One really has to wonder how long this sort of "justice'' goes on before some seriously injured cyclist upon recovery buys a big junker of a truck...
Extendable dog leads should be outlawed. They are dangerous for everyone even the stupid dog walkers who use them.
Why do I ride on the pavement? Because the A82 through Fort William where I live is bad enough without me holding up the traffic and it's...
Somewhat ironic, isn't it, when a large percentage of road racing fans won't be able to watch it on TV?
It was nowhere near than bad, or at least the traffic cleared fairly quickly. I went through this area at 6pm last night and it was free flowing if...
Still got that weird Boardman short legs, and longer body geometry thats got me running an 80mm - 17 degree stem on a medium-sized frame and I'm 5...
Hmm, interesting....
But my human rights / Magna Carta / driving is a normal activity / millions do so every day without killing etc. etc.