Topeak takes a different approach with its Prepstand ZX by doing away with the clamp. It works fine for basic maintenance and cleaning, plus it's compact, very portable and easy to use, but inevitably it's not as secure for more serious work – and it's still quite expensive.
This stand feels and looks classy; the build quality is superb. Even by the end of the test, the 6061 T6 tubes were showing no signs of rubbing, abrasion or wear, despite the regular opening up and closing of the stand. The etched height markings are as clear as they were when it came out of the box.
> Find your nearest dealer here
The rubber feet and clamp jaws are equally sturdy, effective and durable. The QR clamps are chunky, easy to operate and grip the tubing securely.
The Prepstand ZX is sure to appeal to those attending sportives, races or other such events when they start up again; it's just the job for pre-event tinkering and post-event washing. Its folded size and weight make it ideal for this.
It's perfect for fettling at home too. Folded down the stand is just shy of 90cm long, with an 11cm cross section at its widest parts, so it's easy to store. Topeak claims it weighs 3290g, though we measured it at a fair chunk less – 3010g. Either way, it's not particularly heavy.
While the height is adjustable up to 132cm, the arm extends a fixed 30cm away from the vertical stand, so the pedal never comes close to the stand.
Your bike is held by thick, rubber jaws, and sits with its front wheel on on the ground. While the most obvious way is with the jaw under the saddle, some frames allow you to get the jaws around the seat tube, giving a nicer work level for some jobs.
Topeak says it's 'not compatible with aero seat post widths larger than 45mm'. It takes my carbon bike with a 45mm aero post, but it's not ideal; it's forced to sit at a slight angle.
That 'front wheel down' stance means the smaller your bike, the more you have to stoop to work on it – but despite Topeak's intention, it's not vital to have the wheel on the ground. I've aligned front disc brakes with the stand fully up, with no problems. It's okay for something like gear indexing too – you just get a bit more movement.
The stand really does make a great post-ride wash prop, and it's simple enough it doesn't really suffer so long as you don't fold it away soaking or refuse to show it the lube.
Limitations
While tasks like changing cables, adjusting brakes and gears are no problem, the lack of a clamp means you can't do anything requiring even a moderate amount of torque.
> 11 best bicycle repair stands — get the right workstand for you
Also, the stand has a limit of 25kg, and the heavier the bike the less stable it is. You can boost stability by lowering the height, though as mentioned, this results in more stooping.
Finally, there is no tool holder, and I really missed this. Something to hold hex keys and bolts close to hand while working is priceless. Topeak does a compatible Aluminium Tool Tray that it has unfortunately managed to put a price on, however, and it's a £17.99 extra.
Value
Given this stand's limitations, it's a considerable investment at £139.99. However, if you plan to stick to basic maintenance and want something that is hassle-free, portable and of excellent quality, it really fits the bill.
For comparison, FWE's Compact Folding Workstand is £64.99 and perfectly decent, though the quality isn't up to Topeak's standards. If you want to match the quality, Park Tool's PRS 25 Team Issue Repair Stand is great (and has a more traditional clamp), but it's £300 – its more basic PCS 9.2 Home Mechanic Repair Stand is close to the Topeak at £149.99, though, and again is far more versatile thanks to its clamp, taller adjustment and higher weight rating.
Wiggle's in-house LifeLine Home Mechanic Workstand is £90, and even comes with a mat.
Conclusion
If you plan to stick to lightweight maintenance and principally want a portable, easy-to-use stand, Topeak's Prepstand ZX is a decent choice and certainly worth considering. It's good quality and should serve you well at home or away.
Verdict
Fine for basic maintenance and cleaning, portable and easy to store – but not for strenuous jobs
Make and model: Topeak Prepstand ZX
Size tested: 96 x 86 x 58cm
Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
Topeak says: "This simple and easy-to-use workstand does not require any mounting or clamping action which may scratch or damage your bike seat tube surface or seatpost. Just lift your bike, hang seatpost or seat tube on the arm of bike holder, and lift up rear wheel for bike maintenance and adjustments. Optional tool tray holds tools and small parts close for easy access."
Tell us some more about the technical aspects of the product?
HOLDER HEAD: Hard rubber jaws
HOLDER HEIGHT: 80 cm to 108 cm /(31.5' - 42.5')
ATTACHMENT: Attaches to seat tube or seatpost with front wheel on the floor
FOLDING: QR clamps
MATERIAL: 6061 T6 tubes
MAX WEIGHT CAPACITY25 kg / 55 lb
ADDED FEATURES: Rubber base feet Optional tool tray (Art No. TW016-SP01)
LIMITATIONS: Not compatible with aero seatpost width larger than 45mm
SIZE: 96 x 86 x 58 / 37.8' x 33.9' x 22.8' (Open) 88 x 11 x 11 x / 34.6' x 4.3' x 4.3' (Folded)
WEIGHT: 3.29 kg / 7.25 lb
Rate the product for quality of construction:
10/10
Rate the product for performance:
7/10
Only intended for light maintenance, and it's a good stand for this. May be low for tall folk, though.
Rate the product for durability:
8/10
Rate the product for weight (if applicable)
8/10
Rate the product for comfort (if applicable)
7/10
Makes maintenance much more comfortable, though may be a bit low if you're tall.
Rate the product for value:
4/10
It's a bit pricey compared with some, and it has its limitations, but it's a top quality product that does what it's designed for.
Tell us how the product performed overall when used for its designed purpose
Very portable, exceptionally quick to set up and perfect for light maintenance. I can't fault it in terms of its designed purpose.
Tell us what you particularly liked about the product
Quality build, compact fold, zero-faff mounting. For light maintenance and washing, I go to this stand every time.
Tell us what you particularly disliked about the product
Nothing when used for its designed purpose.
How does the price compare to that of similar products in the market, including ones recently tested on road.cc?
It's not cheap. FWE's is half the price, while Wiggle's own LifeLine Stand lies between the two at £90. If you step up in quality Park Tool will cost you more, but you're getting a clamp in all these cases.
Did you enjoy using the product? Yes
Would you consider buying the product? Yes
Would you recommend the product to a friend? Yes
Use this box to explain your overall score
For light maintenance and cleaning it's fine, and its size means it travels easily too. It's not as secure as a clamped stand for more serious work, but it's not designed to be; the high price given its slightly limited use does hold it back slightly, though.
Age: 39 Height: 173cm Weight: 64kg
I usually ride: Road My best bike is: Carbon road.
I've been riding for: Over 20 years I ride: Most days I would class myself as: Expert
I regularly do the following types of riding: commuting, touring, club rides, general fitness riding, Getting to grips with off roading too!
If businesses are suffering on Linthorpe Road it is entirely their own fault, most of the destination type shops moved out long before the cycle...
So where is the entitlement of wanting to get from A to B in relative safety? The city centre is dire regarding cycling infrastructure and while...
I live in a mostly flat town and can maintain 22-25mph. Makes no difference to drivers who still overtake frantically even only to slow down to my...
It seems that virtually all of their road tyres are now prefixed 'One', which I think is counterproductive....
We can see whether we need to build more houses once we have used up the estimated (Local Government Association) 1,000,000+ unoccupied homes...
Oh - I wondered if I was running the right pressure. Perhaps someone has some thoughts on what that might be for a road bike?
https://www.bbc.co.uk/news/articles/c20e3z7vg07o
👍🏼 IMHO, one of the main things to look out for is butted tubes, double or even tripple butted. ride safe and have a great Christmas
TRP cable-actuated hydraulic calipers, haven't tried them myself but reviews generally rate them as better than cable-only brakes such as Sora. I...
And we can be sure that Police Scotland would be similarly disinterested...