- News
- Reviews
- Bikes
- Accessories
- Accessories - misc
- Computer mounts
- Bags
- Bar ends
- Bike bags & cases
- Bottle cages
- Bottles
- Cameras
- Car racks
- Child seats
- Computers
- Glasses
- GPS units
- Helmets
- Lights - front
- Lights - rear
- Lights - sets
- Locks
- Mirrors
- Mudguards
- Racks
- Pumps & CO2 inflators
- Puncture kits
- Reflectives
- Smart watches
- Stands and racks
- Trailers
- Clothing
- Components
- Bar tape & grips
- Bottom brackets
- Brake & gear cables
- Brake & STI levers
- Brake pads & spares
- Brakes
- Cassettes & freewheels
- Chains
- Chainsets & chainrings
- Derailleurs - front
- Derailleurs - rear
- Forks
- Gear levers & shifters
- Groupsets
- Handlebars & extensions
- Headsets
- Hubs
- Inner tubes
- Pedals
- Quick releases & skewers
- Saddles
- Seatposts
- Stems
- Wheels
- Tyres
- Health, fitness and nutrition
- Tools and workshop
- Miscellaneous
- Tubeless valves
- Buyers Guides
- Features
- Forum
- Recommends
- Podcast
TECH NEWS
Paul Lew 1.jpgWhy won't the UCI allow disc brakes on the road?
Paul Lew, the man behind the Reynolds range of wheels, has been nominated as the Vice Chairman on Wheel Committee after two years on the board. The committee is a sub-group of the Bicycle Technical Committee and deals with UCI on the issue of wheels.
Why would you care? Well, the committee has an ongoing conversation with the UCI on the approval of wheels for UCI-sanctioned events.
Currently, the UCI requires rupture testing of all “non-standard” wheels which have “rims taller than 2.5cm, fewer than 16 spokes and spoke thicknesses of over 2.4 mm". Here’s the current list. The UCI aims to ensure wheels are safe for racing, while the manufacturers say the UCI testing protocol is unrealistic and hard to reproduce.
The committee met most recently just before the Eurobike show, with a discussion about disc brakes. The UCI don't currently allow disc brakes in road events. Paul Lew has provided his observations coming out of that meeting. We'll print them in full...
"The day before Eurobike started, I participated in the most recent UCI disc brake discussion. In that meeting, compelling evidence was presented that indicates the UCI may postpone its approval of disc brakes indefinitely. With most of the industry’s key suppliers embracing the new technology, one might ask: “Why is UCI resisting the technology of road disc brakes?”
For some insight as to why the UCI is resisting the technology of road disc brakes, here is an excerpt from its presentation. Please excuse any typos, misspellings, or grammatical errors — these are the words, spellings and phrases from the UCI’s 27 August 2013 presentation (everything that follows in bold italics comes from that presentation).
1 Disc brakes are still considered as technical innovations on the road and have to be submitted to the UCI and approved by the Equipment Commission to be allowed in competition after one or several test events.
2 Until today no disc brakes adapted for the road cycling was never presented to the UCI.
3 Challenges on the road are very different from the mountain bike or cx with
• Higher speed
• Longer braking time
• Higher temperature accumulation
• Bigger disk which means bigger issue in case of crashes
• Braking behaviour that may block the wheel and make the bike slip
• Difference of braking performance between disk brakes and rim brakes that may cause crashes inside the peloton
The UCI don’t want to allow dangerous, non-adapted braking systems in competition that may cause even more crashes instead of improving safety
If disc brakes will be allowed on road events, enough time will be given to the industry to adapt to this decision
For cyclists who compete in UCI-sanctioned events or sanctioned events that adhere to UCI regulations, the message is clear: disc brakes are not allowed. UCI has made it clear that they have reasons not to accept disc brakes and if we take a historical perspective, UCI is not easily persuaded to adopt regulations that permit new equipment.
For cyclists who don’t compete in UCI events, it’s easier - and also a bit more complicated. Disc brakes are here to stay and they offer many benefits. Certainly, they are “allowed” for casual group riding and tours. Those who intend to compete on bicycles with disc brakes in local events will need to check regulations on a case-by-case basis.
The UCI attitude regarding disc brakes will influence the trajectory of disc brake technology, which is driven by the willingness of manufacturers to invest in developing and advancing disc brakes, and the consumers’ demand for purchasing them.
Reynolds Cycling has made commitments to embrace the new disc brake technology, and to simultaneously improve our rim brake technology. For example, in 2013, Reynolds has released both an upgraded rim braking system (the Cryo Blue Power brake pads), as well as its first disc brake road wheel, the Assault Disc. As one of the early adopters, Reynolds Cycling will invest a significant portion of their product development budget to lead the market place with innovative disc brake wheels and solutions.
Time will tell where the UCI goes with approving disc brakes on the road. Reynolds and I will remain committed to participating in the discussion, ensuring safety, and embracing innovation. Whatever the outcome, the cyclist and the sport are always better off for having new technology options."
So, according to Paul Lew, the UCI isn't in any great hurry to allow disc brakes in competition on the road, and it might never actually approve them.
Now, it must be said that these comments were made prior to today's election of Brian Cookson to the UCI presidency. Our next question to Paul Lew is whether he thinks the new change at the top is going to make a difference on this issue. We'll keep you posted.
Taking that a step further, will the new regime be changing other equipment rules any time soon? The best known rule, of course, is that complete road bikes aren't allowed to weigh any less than 6.8kg, but many maufacturers we speak to feel that other restrictions currently in place are also limiting the progress of bicycle design.
Wouldn't now be a good time for a wholesale review of the rules and regs?
Post script
We now have a reply from Paul Lew. Here's what he says...
"It's important to know that neither I, nor anyone else [on the committee], had any input [on UCI's position] - this was a word-for-word recap of UCI's position at that moment. That's not to say that in the future I and other committee members won't have input.
"In my position as a representative of manufacturers and cyclists, as well as a fair-minded ambassador for UCI, it is important that I stay balanced in my perspective. This means that people who have an opinion for or against disc brakes may from time-to-time find frustration with my opinion on the matter, which is to try to walk a narrow line, halfway between welcoming innovation while also working to see the UCI perspective.
"This IS a negotiation and taking a hard position from either side will stall progress. It is my job to try to find an agreeable way to encourage innovation while respecting the traditional attitudes of UCI. There is a gap and we must build a bridge, not stand on one side of the gap or the other and sling arrows."
The issue of disc brake use in road competition looks set to be a big topic of debate for the forseeable future. Whatever the eventual outcome, it surely needs to be addressed properly with serious examination of the facts, because right now nobody really knows how it would influence road racing or whether oft cited safety concerns are well-founded.
David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes.
Latest Comments
- chrisonabike 18 min 58 sec ago
That's a bit forward! But yes; pop up any time you like. Except when the buses have been at the bridges.
- Owd Big 'Ead 53 min 2 sec ago
Manchester? Twats in cars not prepared to blame twats in cars for congestion. Some things never change.
- Dnnnnnn 1 hour 7 min ago
Not sure what other options you have on a disc-braked bike!
- chrisonabike 1 hour 50 min ago
If we can only build enough 2nd homes / buy-to-lets maybe that will ease the rental market, assure future housing for the children of the...
- TheUntypicals 2 hours 23 min ago
If businesses are suffering on Linthorpe Road it is entirely their own fault, most of the destination type shops moved out long before the cycle...
- giff77 2 hours 39 min ago
So where is the entitlement of wanting to get from A to B in relative safety? The city centre is dire regarding cycling infrastructure and while...
- whosatthewheel 2 hours 44 min ago
I live in a mostly flat town and can maintain 22-25mph. Makes no difference to drivers who still overtake frantically even only to slow down to my...
- Pot00000000 5 hours 18 min ago
👍🏼 IMHO, one of the main things to look out for is butted tubes, double or even tripple butted. ride safe and have a great Christmas
- wtjs 6 hours 46 min ago
And we can be sure that Police Scotland would be similarly disinterested...
Add new comment
49 comments
just accept the relentless advance of technology instead of fighting it. The sport must keep up with the times (and therefore technology) it it will be left in a wayside ditch
Having ridden and raced mtbs for a quiet a number of decades, comparing mtb to road event is quite a silly thing to do. Apart from the start you are unlikely to get a bunch of more than 20 at anyone time. Most of the time these will be in single file unless passing. Crashes tend to take one or two out but not masses like road race can. I'd hate to think of the possible burns caused by discs if there was big crash the poor sod at the bottom of the pile would suffer after being in contact with a hot rotor for upwards of 30 seconds.
I agree with the UCI banning discs for simply keeping the costs down for both teams and support along with keeping the weight limit. Anyway it's no different to F1 for the last few years. We the general public can drive turbo charged engines yet F1 hasn't for a while. I'm sure that ABS is also banned from F1 along with traction control.
There is another possiblity, that of keeping rim makers and wheel builders going. I've not worn out one rim on any of my mtb disc wheels and therefore never needed to buy another set. So if everyone is riding on the same set as they did several years ago......
Remember Mario Chippolini? A quote of his was 'if you brake you don't win' On a long ride today we had some really fast descents, top speed was 82kph, I didn't really have to brake very much at all, disk brakes wouldn't have made any difference. Some of our companions were a little over cautious and were on their brakes a lot, maybe it's just inexperienced riders who think disk brakes will make them a better rider
I have no interest in using disks on my fast road bikes, in the wet or dry (just learn to anticipate) However, a touring bike with disks, belt drive Rholff hub, drop handlebars, etc could be quite tasty
One of the nice things about regulation of the bicycles is that it keeps the playing field somewhat level, and the costs to be competitive down.
Once they allow disc brakes, if there's an advantage to them, every amateur racer is going to have to upgrade to them in order to stay competitive. That will effectively mean a new bike - which is not an insignificant cost for some. There will also be a transition period, where there'll be some in the bunch with discs and some with rims. I'm pretty sure the disparity in braking will cause problems.
Then you have to ask, what are the advantages to the racing exactly? Who benefits? The racers don't - particularly amateurs - cause they have to fork out for new kit. The spectators? Not really, the racing will be the same.
The only people who'll benefit are the manufacturers.
Of course, this UCI rule doesn't stop you buying a disc brake road bike for non-UCI sporting use, if you want.
So what's the fuss?
Erm, they're not bigger. I have 200mm rotors on my mountain bike. I thought road discs were typically smaller, at 140mm or 160mm?
Yes, discs can get very hot on long descents - hot enough to hiss if water gets on them. And yes, I have burned myself on them during a crash. And it hurts. But I've hurt myself far worse on rocks and other things I've fallen onto. I hit my balls on the stem once during a crash. That was no fun at all. In a road race situation, I'd be far more concerned about chainrings, spokes and just generally hitting the tarmac at 45kph.
There can no longer be any justification for the ridiculous 6.8kg weight limit, so that should be lowered immediately, but it would be nice to see the UCI at least looking at discs seriously, rather than just seemingly dismissing them out of hand as some kind of new devilry.
Most MTBs aren't 200mm the odd DH bike ,more likely 160 or maybe a 180 on the front or on out and out XC race bikes 140 on the back.
It is very unlikley that road bikes can safely run 140s, CX bikes no issue, but on long road descents small discs are not a good idea. Road descents are longer and faster than MTB descents, higher speeds mean bigger rotors to deal with the extra heat generated.
i've ridden on the road with a 160/140 setup with no issues. you wouldn't get away with a lightweight rotor but standard weight kit should be fine
It's a well-known phenomenon in risk management: that people consistently underestimate familiar risks and overestimate unfamiliar ones, hence all the talk about the hypothetically risks of superheated rotors slicing off limbs.
Example: if you are seeing some guy doing 50 mph on a motorcycle in shorts and t-shirt, with a light, open-face helmet, you'd be completely right to think he's a idiot with a death-wish. But a cyclist doing the same speed in the mountains in lycra, that's totally normal!
What I want to see in the pro tour is triathlon style changing stations on top of all the big climbs where the riders slip into motorcycle suits and helmets. Also the police should be able to stop and fine you if you are going faster than say 30 mph and not wear MC style protection. You know, for safety.
For truth. Did a cake run through the Pennines and back the other week, was glad I'd taken a bowel movement before I'd set off on some of the longer and more twisty descents. Having grown up with a variety of motorbikes in the driveway/garage/on the kitchen table, I kept on longing for the full leathers with bits of kevlar. Glad I had disc brakes though.
Isn't swearing in internet forums exciting?
Is it me, or is all this 'difference in braking power' the biggest load of absolute fucking shite I've ever heard?
Let's take a hypothetical bunch coming around a sharpish corner. If no-one in this bunch had EVER ridden that bike with that set-up before, then perhaps yes, you may get people jamming the brakes on, locking up, not pulling hard enough etc. and the resulting pile ups. However, assuming that everyone in this hypothetical bunch will at the LEAST have ridden around the car park before starting, I imagine that they will all have a reasonably good idea of the modulation and finger-pressure:braking effect ratio of their particular set up. This means that while an individual bicyle's braking power may differ from that of its neighbour, that old walnut the human brain will be able to ascertain differing and even rapidly changing speeds and distances between bicycles, much as it always has done, and allow for braking as required by the individual.
Rant over, and excuse the hyperbole - isn't it just the WORST thing EVER?
At first I was all for disc brakes, but I've changed my mind. I would certainly be buying them for a winter bike though as they are much better in the wet.
I also can't see a problem in pro races where every rider could easily ride discs, the real problem is in amateur racing. Although not inherently more powerful, the modulation of disc brakes makes it feel easier to apply more power. Going into a corner in a race the guy in front of you on discs may think he is only feathering for the corner while you are pulling very hard on your rim brakes so you don't go into the back of him. You never usually brake that hard as you don't want to be rear ended, guess whats going to happen.
To whoever wrote about disc brakes in motor racing the analogy doesn't apply, in motor racing corners are taken on the limit of a cars traction and drivers have a predetermined braking point on track, if you have worse brakes you already know your'e braking earlier to get down to cornering speed. In cycle racing you brake when the guy in front does to stay on his wheel and unlike car racing you will be 2 or more riders wide and it's bad form to 'race' in corners.
When dual pivots were introduced but only some teams had them there were indeed numerous crashes due to the differential in braking performance - and that with the world's top pros.
Why do people think there are no brakes on track bikes?
And to D A Brett: you can't actually buy a bike with discs and go out and road race, not even as am amateur, certainly not in the UK. The UCI rules apply to all member governing bodies.
and to Shay!! how many UCI road races do you enter??
Reply to D A Brett,
Well all of the road races I rode over a period of about 15 years, in the UK and Ireland, were actually held under the rules of the UCI as we're the hundreds of races on the track.
The UCI does not only govern professional races.
There are no cars? Or lorries? Or junctions?
Good points indeed Paulfg42.
The main reason in addition is that track bikes are ridden in very tightly packed groups, at very high speed and on banked tracks and the use of brakes would enable sudden slowing meaning that either the riders would need to ride further apart (and consequently at lower speeds) or there would be many more crashes.
I would love to be on a Wheel Committee
How hot does a rotor get if you're not descending an Alp? Genuinely curious.
I can see them being mildly more dangerous that a caliper brake in the event of a pile up, but not exactly the death trap they're made out to be.
I wish they'd decide because I'm deciding what bike to get and there aren't many disc road wheels yet.
youve had the call from team sky then??
i can blue them up and make the air all wavy on the descent into town (160m descent in 3km). so pretty hot. but that's braking to deliberately heat them up.
pile-ups happen in races because people don't have enough time to brake.
There are a few cases of Shimano Icetech rotors melting, warm enough?
I dont know why most of you are getting excited!! its not going to affect any single one of you, not unless you,ve had a call From David Brailsford saying your in the team!!
You can all go out, purchase a disc braked roadbike & road race!! whats the problem, some have to moan about something!!
nope, you really can't. it's not allowed. british cycling are bound by the UCI rules for road races
Wow. I mena ...,.just, wow.
Does anybody proofread this? Does the editor or proofreader have a command of the English language? How about grammar? Agreement? Blimey and crikey and cr@p... And whatever other expletivees one may wish to use when perusing such a poorly constructed piece. Dear lord man, learn to write.
"Mena"? "Expletivees"?
Well, you have to remember that not everyone is as well-educated as you, Tregouet.
Did you not read the bit where Paul Lew said, "Please excuse any typos, misspellings, or grammatical errors — these are the words, spellings and phrases from the UCI’s 27 August 2013 presentation"?
Or did you purposely ignore it for reasons of irony?
I see you're adhering strictly to Muphry's law there...
I think the UCi are just doing it to wind up all you that think cycling is about nothing more having more money to spend on posing.
All this talk of 'super hot disks', making it sound like super heated white hot disks of destruction. Come on chaps, they get hot for limited parts of any ride (during braking) and cool down pretty quick, if they didn't, that would be a problem in itself.
If disks are a problem in a crash, what about other potentially dangerous parts of a bike?
Disks that are either hot or warm are not the real problem here, it's spokes
I don't get that either - there are plenty of very sharp pointy things on bikes that can get all painful in a crash (as well as the very hard flat thing called "tarmac" that you land on), frankly I don't think discs are a problem. I mean, they're allowed in CX and MTB and I'm not aware of racers coming back with fingers amputated or large red burn marks in their thighs...
Safety - back in the day (before carbon fibre), racers were doing everything possible to lose weight off the bikes including drilling out parts (even frames!). This was natually somewhat unsafe so the UCI moved to ban the practice. However, CF came along and kind of blew that one apart - it's perfectly possible to buy an off-the-peg bike now, tested to all relevant specs which is way below that limit. The limit is outdated, simple as that - it was fine back then but it's not suitable now.
Price - trickle down technology. Not an issue at pro-level (where it's all sponsored) and at amateur level, there will always be the haves and the have-nots. I've seen Elites riding (and winning) on Ultegra & 105, I've seen 4th cats on bikes worth £10k, riders at tin-pot crits using £2000 wheels...
It's not about power. It's about consistent braking, wet or dry, it's about not using the rim (a major structural component) as a braking surface. No-one is going to go round locking up wheels (your brain very quickly figures out the amount of force to apply at the lever); you just have more modulation, more power and more consistency.
Pages